How to install aluminum stair edge nosing
Staircase plane and façade should be 90 degrees, first clean the staircase steps, in the front of the staircase and the back of the aluminum stair edge nosing coated with universal glue then hit by a rubber hammer after a slight dry.
Or if the aluminum stair edge nosing with punching hole. You can fix the aluminum stair edge nosing on the staircase surface by screws and finally plugged into the glue bar to the surface
Note: Marble, tiles and other materials that are not easy to punch are recommended to fix the aluminum stair edge nosing by universal glue, the rest of the material is recommended to use self-tapping screws and expansion pipe.
Such as with the special package angle metal buckle fixed at both ends of the package angle, in the prevention of the angle of the horn to shrink and fall off at the same time also reached an advanced aesthetic effect.