FAQ

Knowledge about Internal Corner Trim



Knowledge about Internal Corner Trim



1. Clean the internal corner trim first, keep the wall smooth, neat.


2.After cleaning up the corner, the first on the wall to draw a line of internal corner trim, horizontal lines of measurement to start from the ground test.


3. After drawing a good horizontal line, along the top of the horizontal line, every 5cm, on the wall for drilling, and then in the hole drilled into the wedge.


4.the internal corner trim just from the ground to measure a good horizontal line, using a round nail to the internal corner trim wire fixed in the wedge, and then hit the top hat with tools.


It is worth mentioning, remember to ensure that the internal corner trim of the length and the flat-head phase connection.


5. The installation of the internal corner trim to ensure that the internal corner trim of the vertical phase, followed by the end of the internal corner trim saw into a 45-degree bevel, to ensure that the curve of the face can be.