Aluminum non slip stair nosing is mainly used for stairs, to protect the surface of the staircase from breakage, to prevent the upper and lower stair slip hurt the role of people. The aluminum alloy anti-slip strip is composed of a double-layer structure, the bottom is made of high-grade aluminum-magnesium alloy, and the surface is a special formula PVC.
General surface PVC Rubber strips can be selected for a variety of colors. Because of the low density of aluminum alloy, high strength, close to or over high-quality steel, so the aluminum non slip stair nosing has excellent conductivity, thermal conductivity and corrosion resistance.
And compared to wood, plastic non-slip bar, color more colorful, and wear-resistant, anti-aging, anti-bacteria, flame-retardant, anti-fouling, environmental protection, tasteless, non-toxic. Suitable for a variety of material size of the staircase surface.
In large shopping malls, hospitals, schools, cinemas, office buildings and other places are everywhere.
1, to protect the surface of the staircase from damage 2, to prevent up and down stairs and fall injured 3, and can decorate the staircase, play a beautiful role Luxurious appearance, durable, special formulation of the surface of PVC adhesive, super wear-resistant, mute, convenient construction.
Adopt national standard 6063-T5 aluminum, this alloy has the alloy proportion hardness achieves (13-15) degree, the service life is longer than the general aluminum material extension (3-5) times, its yield strength can reach above 500Mpa. Stair plane and elevation should be 90 degrees, first stair steps clean up, in the staircase and the corner of the bar to apply the back of the universal glue, such as a slightly dry adhesion, with a rubber hammer hit the adhesive place, you can.
Or in the aluminum alloy base drilling, with screws to the aluminum non slip stair nosing fixed on the staircase, and finally the surface of the glue can be inserted.
Note: Marble, tile and other not easy to punch the material recommended using superglue fixed, the rest of the material recommended use of self tapping screws and expansion tube fixed. such as with a special corner metal buckle fixed at both ends of the corner, in preventing the angle of the slip bar shrinkage and fall off the same time to achieve high aesthetic effect.