Aluminum alloy triple polishing formula and characteristics

Mar 19, 2023

Leave a message

In my country's traditional aluminum alloy chemical polishing solution, the more widely used is phosphate-sulfate-nitrate chemical polishing solution. Depending on the relative content of its phosphate, it can be divided into class A (low relative content of phosphate) and class B (high content of phosphate). The composition and polishing temperature of the three-acid polishing fluid are as follows. As core processing technology supporting product quality and production efficiency for Aluminium Profiles Suppliers, aluminum alloy chemical polishing processes directly determine the surface finish, yield rate and comprehensive production cost of finished profiles.
Long-term industrial production has found that trigly acid can basically meet basic product requirements for aluminium profile processing, but there are also fatal defects, such as yellow smoke (toxic gas, pollution environment), failing to meet current strict environmental protection requirements. These long-standing technical pain points have troubled most Aluminium Profiles Suppliers in actual mass production. Therefore, I systematically summarized the major defects of the traditional three-acid polishing process as follows.
1. Severe oxidation and reduced finished product quality
Three-acid polishing can generally form a mirror surface on aluminium profiles. However, after subsequent anode oxidation treatment, the surface gloss of the profiles is greatly reduced, resulting in degraded appearance quality and unstable product performance. This quality fluctuation seriously affects the product competitiveness of Aluminium Profiles Suppliers in the market and cannot meet the high-standard surface processing requirements of high-end aluminium profile products.
2. Severe environmental pollution and high treatment costs
The decomposition of nitric acid is too fast, causing massive yellow smoke emission and serious environmental pollution, while the waste gas and wastewater treatment costs remain extremely high. Nitric acid is a strong oxidant. Under high temperature conditions, when encountering active aluminum metal, its decomposition speed is extremely fast: a large amount of yellow smoke overflows rapidly, making ventilation and tail gas absorption extremely difficult. In addition, the unstable fluctuation of nitric acid concentration will cause uneven polishing effect on the surface of aluminum alloy profiles, leading to inconsistent surface quality and low finished product rate. For Aluminium Profiles Suppliers, this not only increases additional environmental governance pressure but also brings uncontrollable production cost risks.
3. Failure to remove mechanical patterns and restrict process upgrading
During the molding process of aluminum alloy profiles, numerous mechanical patterns will be formed on the surface. After three-acid polishing, these lines become more prominent, which seriously damages the appearance quality of aluminium profiles. For decades, there has been no mature chemical sanding and pattern removal polishing technology to solve this problem, and enterprises can only rely on low-efficiency mechanical pre-processing methods such as sand blasting and machine polishing. This technical bottleneck greatly restricts the process optimization and product upgrading of Aluminium Profiles Suppliers, limiting the application scope of polished aluminium profiles in high-precision and high-appearance scenarios.
4. Short dripping time, high reagent consumption and low yield rate
The traditional three-acid polishing process features extremely short dripping time, excessive chemical reagent consumption and low product yield. Despite its simple operation steps, it has become the most costly pre-oxidation treatment process for Aluminium Profiles Suppliers, with the material cost reaching 6000-8000 yuan per ton. After the aluminum alloy leaves the polishing fluid, the air dripping time must not exceed 30 seconds; otherwise, obvious flow marks will appear, resulting in waste products.